Re: omnibot charging?


[ Follow Ups ] [ Post Followup ] [ Mike's NEW Omnibot's Message Board ] [ FAQ ]

Posted by derek (12.222.51.20) on February 17, 2005 at 14:58:05:

In Reply to: Re: omnibot charging? posted by Service on February 16, 2005 at 23:40:03:

i thank you for helping me. O.K. I bought a multimeter and found out i had 6.68 volts from the battery to the top chrger adapter plug from there the red and black wire go to the board, I had no power to the board. I fixed the jack switch and now I have 6.68 volts to the board. Now when I turn on my bot I get the eyes to flash ounce and make a beeping noise but it wont home out. I have found most of the home sensors but how do I track down problem from here. Where does the home sensor start its signal and what route does it take and what reading should I get. I need this info so I can figure out why Im not homing. If its not the homing sensors what else can I check



Follow Ups:



Post a Followup

Name:
E-Mail:
A -nospam- will be placed after the @
Subject:
Message:
Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Mike's NEW Omnibot's Message Board ] [ FAQ ]