Correct charger for omnibot 5402

Questions about Robots
Forum rules
General Rules

* No affiliate links are allowed
* We do not tolerate ANY harassing, insulting or disrespecting against forum Members or Staff
* SPAM WILL not be tolerated.


Posting Rules

* Racist, sexist, hateful or any other post that the Staff of this forum determine to be not suitable will be deleted and the member may be banned.
* Posts should be made in the correct forum and also be on topic.


Signature Rules

* A maximum of 4 lines in your signature
* No more than 2 links can be used
* Font size cannot exceed 3
* Any website you advertise in your signature must be owned by you
* The Staff of this forum will determine if you signature is acceptable



Private Message and Email Rules

* Same rules as forum posting


Violation of any of rules can result in your account and IP address being banned from our Community.

Correct charger for omnibot 5402

Postby MeowRobot » Mon Aug 09, 2010 10:21 pm

I've read all over the website about correct chargers for omnibots
6v
negative center
(a plug that fits)
and mAmps of 300-500 ish (i read it on many different websites, but the all had different recomended mA ;/)

i have a universal adapter (1.5v - 12v) (+ or - center switch)
multiple plugs so it can fit many devices.

but it has 300mA only

my question is, if i get a plug that fits, set it to 6v, and - center,
will it work to charge up my omnibot 5402 properly?

thanks~
MeowRobot
 
Posts: 2
Joined: Wed Aug 04, 2010 11:59 pm

Re: Correct charger for omnibot 5402

Postby omnibotdb » Mon Aug 23, 2010 10:27 am

Well,
That is a good question. The original battery charger that came with the omnibot back in the middle 80's was at 300 mAH.
I can't explain other sites just mine. As I was able to buy better chargers over the years. I changed my F.A.Q to reflect what I was selling.
The higher the mAH rating the faster it will charge. But, the Lead Acid battery doesn't like to get hammered when charging. I wouldn't go any higher then 500 mAH on a changer.

Yes, your charger if set correctly as listed will allow you to charger your robot.

Mike
omnibotdb
Site Admin
 
Posts: 35
Joined: Tue Feb 16, 2010 11:05 pm

Re: Correct charger for omnibot 5402

Postby Johnbob » Fri Dec 14, 2012 11:00 pm

Does anyone know where I can get one?
Johnbob
 
Posts: 2
Joined: Thu Apr 28, 2011 6:27 pm

Re: Correct charger for omnibot 5402

Postby omnibotdb » Thu Feb 20, 2014 6:47 pm

Hello,
Sure, check out the store on this site for some great items.
omnibotdb
Site Admin
 
Posts: 35
Joined: Tue Feb 16, 2010 11:05 pm


Return to Robot

Who is online

Users browsing this forum: No registered users and 1 guest

cron